Charging the Frontier X Plus Device

Fourth Frontier

Last Update hace 2 días

Charging Procedure:


  1. Charge your Frontier X Plus device in a dry and well-ventilated environment.

  2. Before charging, make sure the charging port is dry. Wipe off any water or sweat stains from the outside of the device and shake the device dry. Most importantly, ensure that the inside of the micro-USB port is absolutely dry. Failure to do so might cause issues such as slow charging or overheating.

  3. The Frontier X Plus comes with a medical-grade power adapter and a USB cable. It is recommended to use the provided power adapter with the USB cable for charging the Frontier X Plus device.

  4. Plug one end of the USB cable into the mounted power adapter and the other end of the cable into the micro-USB port on the side of the Frontier X Plus device.

  5. During charging, a solid Blue LED will glow on the top side of the device.

  6. Charging the device from 0 to 100% will typically take 3 hours, and in certain situations where the battery is fully discharged, expect longer charging times.

  7. Once the device is charged to 100%, it will glow a solid Green LED on the top side of the device.

  8. Once the device goes below 10% charge, it will start blinking the red LED.

    Attention: Other chargers and power banks that do not meet the  corresponding safety standards may cause issues such as slow charging and overheating.


Expected Battery Life:


  1. A fully charged Frontier X Plus can last approximately 24 hours in Monitor Mode before you need to download your data and charge the device.
  2. Your fully charged Frontier X Plus should last 14 days if used for an average of 1 hr/day.
  3. For optimal usage, we recommend charging your Frontier X Plus when the battery level goes below 20%.


Viewing the Battery Level:


  1. When looking at the mobile app, your Frontier X Plus’s battery level appears in the top right of any screen.

2. When you press the blue button on the Frontier X Plus once, the Frontier X Plus device screen will show you the battery level on the left, and the total memory consumption of the device on the right.

Was this article helpful?

0 out of 0 liked this article

Still need help? Message Us